Perler Pattern StudioPerler Bead
Motorcycle Perler bead pattern

Motorcycle Perler Bead Pattern

A bright yellow side-view scooter with a lime front stem, charcoal seat and handlebar, and mint wheel hubs — clean and playful as a desk ornament or vehicle keychain. Review the grid and bead colors first, then edit or download the printable pattern.

Grid size
48 × 48
Category
Vehicles
Difficulty
Easy
Colors
6
Beads
529
Edit pattern

Color usage

Lemon ×262
Black ×100
Evergreen ×88
Kiwi Lime ×50
Celery ×18
Neon Orange ×11

Making tips

  1. Lock in the twin wheels and hubs

    Place the two dark-green tire rings first, then fill the mint hubs. Keep wheel spacing true to the chart so the yellow body can sit cleanly between them.

  2. Fill the yellow chassis and fenders

    Lay the bright yellow floorboard between the wheels, then curve the front and rear fenders. Yellow is the main fill — settle it before attaching the green stem.

  3. Raise the lime front stem

    Stack the lime-green stem above the front fender in a slight trapezoid. Leave room on top for the charcoal handlebar block.

  4. Add seat, handlebar, and orange light

    Set the charcoal seat on the rear fender, add the handlebar on the stem, and extend the orange light forward. The orange count is small — scan it once at the end.

  5. Check wheels and light before ironing

    Double-check wheel spacing, closed yellow fenders, a straight stem, and that the orange light and mint hubs are complete before ironing.